breadcrumb (1)

Heating & Furnace Repair

Reliable heating and furnace repair that restores safe warmth, improves performance, and keeps your home comfortable all winter.

2 gallery

Furnace & Heating Repair in Minden, LA

When the first cold front rolls through Webster Parish, you need your heat working, and you need it working safely. Day Air Conditioning & Heating repairs gas furnaces, electric furnaces and heat
pumps for homes in Minden and the surrounding towns. We’re locally owned, licensed and insured, and open seven days a week, with emergency service when your heat goes out.

Signs Your Heater Needs Repair

  • The furnace or heat pump runs but blows cool or lukewarm air
  • The system won’t turn on, or it shuts off before the house warms up
  • It turns on and off every few minutes (short cycling)
  • Banging, squealing, grinding or rattling noises
  • A burning smell that lasts longer than the first few minutes of the season
  • Your gas furnace’s flame is yellow or flickering instead of steady blue
  • Some rooms stay cold while others are warm
  • Your energy bill jumps without a change in how you use the heat

Furnace and Heat Pump Repairs We Handle

Gas Furnace Repair

We repair ignitors, flame sensors, gas valves, limit switches, inducer motors, blower motors and control boards. Every gas furnace repair includes a check of the burners, venting and heat exchanger.

Electric Furnace Repair

We diagnose failed heating elements, sequencers, relays, breakers and blower problems that leave electric furnaces running without heating.

Heat Pump Heating Repair

Heat pumps handle most of the heating in many Louisiana homes. We fix reversing valves, defrost controls, backup heat strips, refrigerant leaks and outdoor fan problems.

Thermostat Problems

Sometimes the heater is fine and the thermostat is the problem. We check wiring, settings and batteries, and replace thermostats that no longer work.

We don’t service boilers or radiant floor heating systems.

Carbon Monoxide Safety Comes First

A gas furnace that isn’t working right can leak carbon monoxide (CO), a gas you can’t see or smell. That’s why every gas furnace repair we do includes a safety check of the heat exchanger, flue and
venting.
If your CO alarm goes off, or anyone in the home has headaches, dizziness or nausea that improve when they go outside: leave the house right away and call 911 or your gas company. Call us after everyone is safe.

Keep a working CO detector on every level of your home and near bedrooms, and test it when you change your clocks.

Common First-Cold-Snap Problems

Many heating calls come in the first chilly week of the year, after the system has sat unused all summer. The most common causes are:
Dirty flame sensor: the burners light, then shut off seconds later.
Worn-out ignitor: the furnace clicks or hums but never lights.
Clogged air filter: the system overheats and shuts itself off.
Tripped breaker or switch: the furnace power switch looks like a light switch and is easy to turn off by accident.

Before you call, check that the thermostat is set to Heat, the filter is clean and the furnace switch is on. If that doesn’t fix it, call us.

Our Heating Repair Process

  1. Call or book online: tell us what’s happening and we’ll schedule a visit.
  2. Diagnosis: we test the system, find the cause and check for safety problems.
  3. Clear recommendation: we explain the repair and the price before any work starts.
  4. Repair: most common parts are on the truck, so many repairs are finished in one visit.
  5. Test and safety check: we run the system through a full heating cycle before we leave.

Repair or Replace Your Heater?

Repair usually makes sense when the system is under 10–15 years old and the problem is a single part. Replacement may be the better choice if your furnace or heat pump is older, needs frequent
repairs, or has a cracked heat exchanger. We’ll give you an honest recommendation, never a sales pitch.

Brands We Repair

We repair all major furnace and heat pump brands, including Carrier, Bryant, Day & Night, Goodman and Amana.

Prevent Repairs With a Fall Tune-Up

Most heating breakdowns start as small problems a tune-up would catch. Our HVAC maintenance includes cleaning, safety checks and testing before winter.

Heating Repair in Minden and Nearby Towns

We repair heaters throughout Minden and nearby Springhill, Homer, Haughton, Sibley, Doyline, Cotton Valley, Sarepta and Bossier City.

Frequently Asked Questions

01.
Why is my furnace blowing cold air?

Common causes include a dirty flame sensor, a failed ignitor, a clogged filter, or a thermostat set to
Fan On instead of Auto. On a heat pump, it can also mean the system is in defrost mode or low on
refrigerant. If it doesn’t fix itself after a few minutes, call us.

02.
Is it safe to run my furnace if it smells like it's burning?

A light burning-dust smell for the first few minutes of the season is normal. If the smell lasts, smells
electrical, or smells like gas, turn the system off and call us. If you smell gas, leave the home and call
your gas company first.

03.
Do you offer emergency heating repair?

Yes. We offer emergency service for heating breakdowns. Call (318) 349-9723.

04.
How long does a furnace repair take?

Many common repairs, like replacing an ignitor or flame sensor, are finished in one visit. Larger
repairs can take longer if a part needs to be ordered.

05.
Do you repair heat pumps too?

Yes. We repair heat pumps in heating and cooling mode, including defrost problems and backup heat
strips.

06.
Should I repair or replace my old furnace?

If your furnace is more than 15 years old, needs frequent repairs, or has a cracked heat exchanger,
replacement is usually the better value. We’ll give you an honest recommendation.

07.
What brands do you work on?

We repair all major brands, including Carrier, Bryant, Day & Night, Goodman and Amana.

Get Your Heat Back On

Don't wait for the coldest night of the year. Call Day Air Conditioning & Heating or book online, and we'll get your home warm and safe again.